Sponsors and Affiliates


Visit Our Other Sites










Help Us Help You, Donate via paypal

S130 Events

  • March 30th, 2008 - Northwest Nissans Meet at the Golden Gardens park in Seattle, Washington


  • Mid April Early May - Northeast Z Meet in Albany, NY
    Click for details


  • If you have an S130 or Z-related event you think should be posted here, contact the site administrator.

    S130 Transmission Differences

    In the 1979 to 1983 S130 280zx there was six transmissions that were offered. Below you will find the differences and specifications.

    Manual Transmissions

    Datsun/Nissan made several 4 and 5-speed manual transmissions available in the second generation Z car or S130. The 1981-1983 FS5W71B is a "close ratio" five speed transmission where the FS5R90A 5-speed transmission found in the 1983 280zx turbo is a "wide ratio" transmission. Close ratio transmissons are preferred for road racing as they allow the driver to maintain a tighter rev range between gears compared to wide ratio versions.

    Finding the "optimum" transmission for your car all depends on what you are wanting from your car. For most people the "best" transmission is what is already in your car.

    You can tell the difference between the FS5W71B and the FS5R90A by the shifter mounting.



    Gear ratio/Transmission Model
    1979 F4W71B 1979-1980 FS5W71B 1981-1983 FS5W71B 1983 FS5R90A
    1st 3.321 3.321 3.062 3.500
    2nd 2.077 2.077 1.858 2.144
    3rd 1.308 1.308 1.308 1.357
    4th 1.00 1.00 1.00 1.00
    5th N/A 0.864 0.745 0.780


    Automatic Transmissions

    There are two Automatic Transmissions that were offered in the S130. They were the 3 speed 3N71B and 3 speed L3N71B. Thay are both a fully automatic unit consisting primarily of a 3-element hydraulic torque converer, two planetary gear sets, two multiple-disk clutches, a multiple-disk brake, a band brake and a one way sprang clutch.

    Other than the number of clutch plates the transmissions are the same. The chart below will explain the differences.

    Engine Model
    L28E
    L28ET
    Model Code Number
    X6703
    X2770
    Torque Converter Stamp
    GH
    A
    High-Reverse clutch (front)
    Number Of Drive Plates
    3
    4
    Number Of Driven Plates
    5
    5
    Clearence mm (in)
    1.6 - 2.0 (0.063 - 0.079)
    1.6 - 2.0 (0.063 - 0.079)
    Thickness of retaining plate
    Thickness mm (in)
    Part Number
     
    5.0 (0.197)
    31567-X2900
     
    5.2 (0.205)
    31567-X2901
     
    5.4 (0.213)
    31567-X2902
     
    5.6 (0.220)
    31567-X2903
     
    5.8 (0.228)
    31567-X2904
     
    6.0 (0.236)
    31567-X2905
     
    6.2 (0.244)
    31567-X2906
    Forward Clutch Rear
    Number Of Drive Plates
    6
    6
    Number Of Driven Plates
    6
    6
    Clearence mm (in)
    0.8 - 1.6 (0.031 - 0.063)
    0.8 - 1.6 (0.031 - 0.063)
    Thickness Of Retaining Plate
    4.80 mm (0.1980 in)
    4.80 mm (0.1980 in)
    Low And Reverse Brake
    Number Of Drive Plates
    5
    7
    Number Of Driven Plates
    5
    7
    Clearence mm (in)
    0.08 - 1.25 (0.0315 - 0.063)
    0.08 - 1.25 (0.0315 - 0.063)
    Thickness Of Retaining Plate
    Thickness mm (in)
    Part Number
     
    7.8 (0.307)
    31667-X0500
     
    8.0 (0.315)
    31667-X0501
     
    8.2 (0.323)
    31667-X0502
     
    8.4 (0.331)
    31667-X0503
     
    8.6 (0.339)
    31667-X0504
     
    8.8 (0.346)
    31667-X0505
    Brake Band
    Piston Size mm (in)
       
    Big Diameter
    64 (2.52)
    72 (2.83)
    Small Diameter
    40 (1.57)
    44 (1.73)
    Control Valve Assembly
    Stamp mark on strainer
    MEM
    TRBK
    Governer Assembly
    Stamp Mark on Governer Assembly
    M33
    M33
    Stall Revolution
    RPM
    2,000 - 2,300
    2,400 - 2,700

    Changing of the gear ratios is fully automatic in relation to car speed and engine torque input.

    Below you will find Identification information of the automatic unit.







    Sources used on this page: